Electrolux B3741-5 user manual Installation Instructions, Safety information for the installer

Installation Instructions
	39

Installation Instructions

1 Attention: The new appliance may only be installed and connected by a registered ex- pert.

Please comply with this. If you do not, any damage resulting is not covered by the war- ranty.

1 Safety information for the installer

•The electrical installation is to be set up so that the appliance can be isolated from the mains with a minimum 3mm all-pole contact separation.

Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be taken out of the holder), RCD’s and contactors.

•Anti-shock protection must be provided by the installation.

•The built-in unit must meet the stability requirements of DIN 68930.

•Built-in ovens and built-in cooking surfaces are fitted with special connection sys- tems. For safety reasons, they must only be combined with appliances from the same manufacturer.

The use of thermal insulation bars is not permitted in cookers with Pyroluxe, if the recess has a back wall and a solid shelf.

However with a shelf shortened by at least 20 mm and ventilation in the plinth of the same diameter, it becomes possible to build-in.