Cleaning and Care |
|
35 | |
|
|
Putting the door glass panels back.
1. From above insert the door glass panels one af- ter the other into the door profile at the bot- tom edge of the door at an angle and lower them.
3 The two smaller panels first, then the larger panel.
2. Take hold of the door trim (B) at each side, posi- tion it on the inside edge of the door and plug the door trim (B) into the upper edge of the door.
3 On the open side of the door trim (B) there is a guide bar (C). This must be pushed between the outer door panel and the guide corner (D).
The clip seal (E) must be snapped in.