Eltax AVR-900 Front Panel Information, No. & Name, Description, Power, Pro, Logic, Standby, Back

FRONT PANEL INFORMATION

NO. & NAME	DESCRIPTION	NO. & NAME	DESCRIPTION
1. POWER	Press this button to turn the unit	12. PRO	When receiving Analog/digital PCM signal
	on or off.	LOGIC II x	or 2CH Pro Logic, turn on this button then
			the playing is under analog 5.1CH state.
2. STANDBY	The power amplifier is in remote	13.DTS/DOLBY	When play 5.1 CH source, and while you
	Stand by mode, indicated by the	DIGITAL	are enjoying Stereo, press this button to
	stand by indicator.		playback source in DTS/DOLBY
			DIGITAL.
3.SURROUND	Push this button to turn on or off	14. MASTER	Rotate this knob clockwise or
BACK	the surround back output.	VOLUME	counterclockwise, the master volume will
			be increased or decreased.
4. DISPLAY	Press this key repeatedly to have	15. PHONES	This is the jack for the stereo headphones.
	PS (program name) or PTY or CT
	(current time) or RT.
5. PTY	In FM state, press this button, the	16. STATION	Press this button to select a preset channel
SEARCH	current program type appears on		during the tuner mode.
	the display, using TUNER + / - to
	select the program type you
	desire.
6. APS	Allocates and memorizes radio	17. MEMORY	Press this button when you wish to preset
	stations automatically.		the broadcast stations.
7. WOOFER	Press this button to turn on/off the	18. TUNING -/+	Broadcast frequency up & down.
ON/OFF	output of subwoofer.
8. DIRECT IN	Press this button to select the 6.1	19. INPUT	Rotate this knob to select inputs
	analogue input.	SELECTOR	BROADCAST (FM, AM), TAPE AUX,
			VIDEO 1, VIDEO 2, VIDEO 3, DVD.
9. DIGITAL	Press this button when using a	20. BALANCE	This knob is used to adjust the balance of
IN	source connected by a DIGITAL		the front speakers.
	IN. Pressing this button selects,
	DVD COA. DVD OPT. VIDEO 1
	OPT & VIDEO 2 OPT. Or when
	using an analog source.
10.	Selects surround modes: Theater,	21. AV 3	Input for VCR, Video Camera Recorder,
SURROUND	Hall, Passthru, Movie, Music, and		etc. It contains an S-VIDEO input jack, one
MODE	Room.		video input and Analog Left and Right
			inputs.
11. STEREO	With the unit in the STEREO	22. ORIGINAL	When this unit is ON, use a paper clip to
	mode, only front left and front	SETUP	press this button for more than 3 seconds to
	right speakers and Woofer are		reset the whole system (including
	working.		memories).

13