Eltax HT-153 Playing The Radio, Positioning, Automatic Tuning, To Play Preset Stations

PLAYING THE RADIO

HT-153 HOME THEATRE RECEIVER VOLUME

			MUTE
Tuner button
DVD	TUNER	SCART	AUX1/2
1		2	3
4		5	6
Number button
7		8	9
			SETUP
0		+10
FM MODE			PRE/TUN
	ENTER
MEMO			AUTO
PAUSE/STEP	PLAY		STOP
VOL			CH
	+		+
ZOOM	PROG	SLOW	A-B
GOTO	TITLE	MENU	DISPLAY
SUBTITLE	N/P	AUDIO	ANGLE
RESUME	REPEAT	R/L	CH.SET
RETURN			PROLOGIC

16	Positioning
	1.Press TUNER button to select desired wave
	band (AM or FM).
	2.Press UP or DOWN button to find a station.
	The frequency will change with each press.
	When a station's signal is received, it	will
	appear in the display.
	3.To lock onto a station quickly, hold the	UP
	or DOWN button for two seconds. The unit
	will start automatic tuning. When a station
	is found, automatic tuning stops.
	4.To add a station to memory, press the MEMO

button. The memory storage number will blink for four seconds in the display. Press MEMO again to store the station.

Memory number

Wave band Station frequency

5.To reduce noise when an FM-stereo program has been received, press the MONO button. The word STEREO will disappear from the display. The program is now heard in monographic form, reducing the noise. To resume stereo play, press the MONO button again.

Automatic Tuning

This unit will store up to 40 individual AM or 50 individual FM radio stations in its memory.

1.Press the >> button. The word AUTO

will appear in the display and the automatic tuning mode is activated.

2.Stations will be stored in ascending order until 50 stations of that particular wave band have been saved. When a station is stored, the

memory storage number, as well as the station's frequency, will flash for four seconds in the display.

3.When the total number of stations reaches 40, in a particular wave's (AM or FM) memory, no further station in that wave band will be saved.

To Play Preset Stations

1.Press the TUNER button to select the desired wave band.

2.Press the PRE/TUN button.

3.Press any of the numbered buttons to

select the desired station's memory number.

For example, to play the station at memory #5, simply press the 5 button; for memory #17, press the 1 button followed by the 7 button.

4.Stations in the memory function may also be accessed by pressing the UP or DOWN button.