Emerson AMC-S402 manual Front Panel Indicators, Color, State, Function

6 Front Panel Indicators

The faceplate of the AMC-S402 module has three LED indicators. The figure and table that follows describes the function of each.

Figure 6. AMC Front Panel Indicators

Table 11 LED Function

Indicator	Color	State	Function
Hot Swap (HS)	BLUE	On	Management power available to the module
			and the module can safely be extracted
		Off	The module is operational and is unsafe for
			extraction
		Long Blink	Delay before module is activated
		Short Blink	Delay before module is de-activated
Fault or “Out of Service” (OOS)	RED	On	Module Fault set by Shelf manager or
			12V payload power not detected.
		Off	No module fault
			12V payload power is being supplied to board
Module In Service (IS)	GREEN	On	12V payload power is being supplied to board
		Blink	Indicates SAS disk I/O activity
		Off	12V payload power is not detected

6806800H60A AMC-S402 Installation and Use 19