Functional Description
3.4Power Regulator
The power regulator is the part of the module that generates the required power from the payload power (+12V) that is delivered to the module through the AMC connector.
This power is current limited by the onboard regulator.
3.5IPMI Subsystem
The IPMI subsystem provides module management control (MMC) for the board. It is based on an Atmel microcontroller. Its function is to monitor module functions such as power, temperature, and hot swap requests via the ejector handle and report these to the base controller in the enclosure. It also stores information about the module including serial number and
6806800H60A | 11 |
