HANGER BRACKET
HANGER BALL
SHORT STEEL UPPER SUPPORT CABLE
Figure 3
5.Install the assembled ceiling fan onto the mounting bracket in accordance with the instructions provided with the ceiling fan.
6.Unscrew the machine screw from the brass nut (supplied) and feed the end of the ceiling fan support cable from the ceiling fan downrod through the loop on the end of the short steel support cable (Figures 4 and 5).
MACHINE SCREW
BRASS
NUT
CEILING FAN
SUPPORT
CABLE
Figure 4
7.Insert the ceiling fan support cable from the fan through the brass nut and reinstall the machine screw. Tighten the machine screw securely (Figure 5). Be sure the steel support cable is securely tightened before proceeding with installation.
ELECTRIC SUPPLY | OUTLET BOX |
WIRES OMMITED | |
FOR CLARITY |
|
DRYWALL CEILING
| SHORT STEEL |
CEILING | SUPPORT CABLE |
| |
COVER | CEILING FAN |
| SUPPORT CABLE |
| CEILING |
| COVER |
| SHORT STEEL |
| SUPPORT CABLE LOOP |
MACHINE | BRASS NUT |
SCREW |
|
Figure 5 | CEILING FAN |
SUPPORT CABLE |
INSTALLATION NOTE: Check all fasteners and retighten where necessary before continuing with the installation of the ceiling fan.
8.To complete fan assembly, proceed to “How to Wire Your Ceiling Fan” in the Ceiling Fan Instructions Manual.
| Air Comfort Products |
| |
Form No. BP7410 | DIVISION OF EMERSON ELECTRIC CO. |
| |
8100 W. Florissant • St. Louis, MO 63136 |
| ||
Part No. F40BP74100000 | 10/09 | ||
|
