BLADE FLANGE
INTERLOCKING
FEATURE
Figure 3
WARNING
To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not
SWITCH HOUSING COLOR CODED CONNECTOR
Figure 5
SWITCH HOUSING
SWITCH HOUSING
ADAPTER
SWITCH HOUSING
ADAPTER COLOR
CODED CONNECTOR
insert foreign objects in between rotating fan blades.
5.Remove and retain one of the switch housing mounting screws (Figure 4) from the motor hub. Loosen the two remaining switch housing screws.
6.Position the switch housing adapter onto the motor hub. Rotate the switch housing adapter clockwise to engage the key hole slots (Figure 4). Secure the switch housing adapter to the fan motor housing by reinstalling the previously removed screw into the remaining hole. Tighten the three screws at this time.
SWITCH HOUSING ADAPTER
SWITCH HOUSING
MOUNTING SCREW
Figure 4
7.Engage the connector of the switch housing to the switch housing adapter connector (Figure 5). The two connectors are keyed and
CAUTION: Before installing and tightening the screws, be sure there are no wires pinched between the switch housing adapter and the switch housing.
8.Make sure all wires and connectors are inside the switch housing, then position the switch housing on the switch housing plate aligning the three holes for installation.
9.Secure the switch housing by installing the four
SWITCH HOUSING
Figure 6
WARNING
To avoid possible fire or shock, do not pinch wires between the switch housing and the switch housing adapter.
10.Carefully turn partially assembled fan upside down and place gently in the styrofoam from carton, in preparation of final installation.
5 | U.L. Model No.: CF830 |