Emerson CF905ORB00, CF905GES00, CF905BS00, CF905VNB00 How to Put Your Ceiling Fan Together

How to Put Your Ceiling Fan Together

1.Remove the 10-24 x 3/8” pan head screw with lockwasher nearest the hook from the ceiling mounting plate and retain for later use. Loosen the remaining two 10-24 x 3/8” pan head screws several turns.

2.While still attached to the ceiling mounting plate hook, pivot the fan motor assembly upwards and mate it up against the ceiling mounting plate. Align and rotate the motor assembly to engage the two keyhole slots with the two loosened screw heads (Figure 5).

3.Securely tighten both 10-24 x 3/8” pan head screws (Figure 5).

4.Reinstall the previously removed 10-24 x 3/8” pan head screw with lock washer to lock the motor assembly onto the ceiling plate (Figure 5).

5.Loosen two opposing 10-24 x 3/8” pan head screws and remove the two remaining 10-24 x 3/8” pan head screws from the outer rim of the ceiling mounting plate (Figure 6).

6.Slide the fan housing trim ring over the fan housing cover (Figure 7). Be sure to position the flat surface upwards towards the ceiling.

7.Position the fan housing cover over the fan motor assembly. Align and rotate the housing to engage the two slotted holes of the fan housing cover with the two loosened screws heads in the ceiling mounting plate. Securely tighten both 10-24 x 3/8” pan head screws (Figure 8).

8.Reinstall the previously removed 10-24 x 3/8” pan head screws to lock the housing cover onto the ceiling mounting plate (Figure 8).

KEY HOLE SLOT

10-24 x 3/8" PAN

HEAD SCREW WITH

LOCKWASHER (3)

FAN MOTOR

ASSEMBLY

Figure 5

LOOSEN TWO OPPOSING 10-24 x 3/8" SCREWS

REMOVE TWO

OPPOSING 10-24 x 3/8"

SCREWS

FAN CEILING

MOUNTING PLATE

FAN MOTOR

ASSEMBLY

Figure 6

CEILING TRIM

RING

FAN HOUSING

COVER

Figure 7

TIGHTEN TWO OPPOSING 10-24 x 3/8"

PAN HEAD SCREWS

FAN CEILING

MOUNTING PLATE

REINSTALL THE TWO PREVIOUSLY REMOVED 10-24 x 3/8" PAN HEAD SCREWS

FAN HOUSING

COVER

Figure 8

9 U.L. Model No.: CF905