Rings to answer
The answering system is factory preset to answer an incoming call after 6 rings, this however may be adjusted by following the instructions below:
rings to answer
rings to answer
To change the “rings to answer” setting:
1. Press and HOLD the 
rings to 
button until the system emits a
answer
tone and the following voice prompt, “please set rings”.
2. | Use the | buttons to change the number of rings up or down |
3. | If you select “TS” (toll saver) the answering system will | |
| answer after 5 rings if there are no new messages, and | |
| after 2 rings if there are new messages. | |
4. When you are finished, press the | rings to | button to confirm |
| answer |
|
the setting.
If voicemail is included as an option from your telephone company, it is important to set the answering system to answer before the voicemail system of the phone company, otherwise your messages will be recorded in the voicemail system of the phone company and not the answering system’s voice mailbox
rings to answer
To check the “rings to answer” setting:
• Press the | rings to | button to check how many rings before the |
| answer |
|
answering system will respond to an incoming call
“6 rings”
rings to | security |
answer | code |
delete
Press to check or press and HOLD to adjust
