Emerson EM6120-2 manual Additional handsets, Adding a new handset

Additional handsets

It is possible to register up to 5 handsets to the base (2 handsets are included) additional handsets may be purchased separately. If you would like to purchase additional handsets, please contact our customer service department at: 1-877-768-8483 (Toll Free) or cs@southerntelecom.com

Adding a new handset

The two handsets that are included in this package are
already registered, use the steps below to register new
handsets only.
1. Press the		button to enter the menu.
2.	Use the ▲ and ▼ buttons and select “Handset” and
	press the		softkey.
3.	Use the ▲ and ▼ buttons and select “Registration” and
	press the		softkey.
4. Select “Register” and press the				softkey.

5.Select “Base 1” and press the softkey.

6.When “System PIN:” appears on the display enter 0000

and press the softkey.

7.When “Press And Hold Page Key On Base” appears on

the display, press and HOLD the button on the base (approximately 30 seconds) until “Handset 3, 4, or 5”

appears on the display.

8.Press on the handset and confirm you hear the dial tone.

rings to	security
answer	code

press and hold to register the handset

Removing a handset

Use to remove handsets that are damaged.

1.Follow steps 1-3 (above).

2.Select “De-register”and press the softkey.

3.Enter system pin 0000 and press the softkey.

4.When “Select HS” appears enter the handset number of the handset you would like to remove (it must be a handset other then the one you are using) and press the

softkey. “Not Registered” will appear on the removed handset.