SETTING THE CLOCK
When the system is connected to the AC outlet for the first time the STANDBY LED indicator on the front panel glows red and “0:00” appears on the display. This is your indication that the time display is incorrect and needs to be reset.
1.) Press the STANDBY/ON button on the front panel or remote control to turn the system ‘On’. The STANDBY LED goes off and the CD display comes on. After a few seconds the display will show “no dISC”.
2.) Press the AUX button on the front panel to select the Aux function. The time display will show 0:00 and the colon will be flashing.
3.) Press the MEMORY/TIME ADJ. button on the front panel or the remote control
for at least 3 seconds.
“24H” will begin flashing in the display indicating that the clock is set for
(Example: 6:00 PM is shown as 18:00)
4.) Press either the | or DOWN | button on the | ||||
front panel of the main unit or on |
|
|
|
|
|
|
the remote control once to |
|
|
|
|
|
|
change the clock format to 12 |
|
|
|
|
|
|
|
|
|
|
|
| |
Hour “American” time. The |
|
|
|
|
|
|
|
|
|
|
|
| |
display will change from “24H” to |
|
|
|
|
|
|
|
|
|
|
|
| |
“12H”. |
|
|
|
|
|
|
5.) Press the MEMORY/TIME ADJ. button again. The Hour digits will begin flashing.
14
ES20_ib061303.p65 | 14 |
13/6/2003, 12:13