PREPARATION FOR USE
UNPACKING AND SET UP
•This system consists of the following components: Tuner/CD Player unit, Amplifier/Subwoofer unit, 2 “Thinovation™ ” Flat Panel Speakers, and Remote Control.
Carefully remove all the components from the display carton and verify that you have all the necessary components before you dispose of the display carton.
•Remove all packing materials from the individual components. Remove any descriptive labels that may be attached to the front panel of the main unit. Do not remove any labels or stickers on the back panels of the main unit or the speakers.
•Remove any small strips of tape that may have been used to prevent the CD door from opening in transit.
•Place all the components in the desired location. This system is designed to be used on level, stable, flat surface such as a table, desk, shelf, or stand, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, or vibration.
•Unwind the AC power cord on the back of the Amplifier/Subwoofer unit and extend the cord to its full length.
•Unwind the lead wire FM antenna on the back of the Tuner/CD Player unit and extend it to its full length.
•The main unit is shipped with a “dummy CD” display card in the CD player. This “dummy CD” card must be removed before you can use the CD player. Refer to the “PLAYING COMPACT DISCS” instructions on Page 21.
4
ES20_ib061303.p65 | 4 |
13/6/2003, 12:13
