PROGRAMMED PLAYBACK
This system has a 20 track programmable memory. You can program up to 20 tracks on a disc to play back in any desired order.
Note: You cannot program the player while a disc is playing. You must press the STOP 
button first to stop playback before beginning the programming steps below.
1.) Load your disc as usual and wait until the display shows the total playing time and number of tracks.
2.) Press the MEMORY/TIME ADJ. button on the front panel or the remote control. The MEMORY indicator flashes and the display show track number “01” and program memory number “P – 01”.
3.) Press the SKIP/SEARCH CONTROLS (
/
) on the front panel of the main unit or the remote control to select
the first track you wish to program. Example: Track 7.
4.) Press the MEMORY/TIME ADJ.
button again to enter Track 7 in 
Program Memory 01 . The 
Program number advances to P - 02 and the track display shows “00”.
5.) Repeat Steps 3 and 4, selecting a different track number each time until you have entered up to 20 tracks in the memory.
26
ES20_ib061303.p65 | 26 |
13/6/2003, 12:13
