4.) Press the SKIP/SEARCH CONTROLS (
/
) on the front panel of the main unit or the remote control to set the display to the desired turn on minute.
5.) Press the MEMORY/TIME ADJ. button once more to enter the turn on time in the memory. After a few seconds the TIMER display stops flashing and remains ‘On’and the display returns to the correct time, the Tuner display, or the CD display.
At the selected ‘On’time the system will turn on automatically to the last function selected, either Tuner or CD. It will play for one hour and then shut off automatically.
Note: If the system turns on to CD function it will only play until the end of the disc and then stop.
As long as the TIMER indicator remains in the display the timer will turn the system on every day at the same time. To deactivate the timer press and hold the TIMER button until the TIMER indicator disappears from the display. To reactivate the timer press and hold the TIMER button until the TIMER indicator reappears in the display.
DISPLAY BUTTON (Remote Control Only)
Normally the display shows the correct time in the Standby (Power Off) mode, the radio frequency in the Tuner mode, and the CD track and time information in the CD mode. You can press the DISPLAY button repeatedly to show the following information on the display:
•In STANDBY (Power Off) Mode: Correct Time 
TIMER ON Time 
Correct Time.
•In TUNER Mode: Radio Frequency 
Correct Time 
TIMER ON Time
Radio Frequency.
•In CD Playback Mode: CD Elapsed Time 
CD Remaining Time 
Correct
Time 
TIMER ON Time 
CD Elapsed Time.
29
ES20_ib061303.p65 | 29 |
13/6/2003, 12:13
