Emerson ES920 owner manual Listening To The Radio, Manual Tuning, Automatic Tuning

Listening To The Radio

1.)	Press the STANDBY button to turn the
	system ‘On’.
	The display lighting comes on and the
	display shows “HELLO”.
2.)	Press the TUNER/BAND button to select the Tuner function.
	An AM or FM frequency will appear on the
	display.
	Press the TUNER/BAND button again to
	switch between the AM and FM bands if
	necessary.
3.)	Tune to the desired station as follows:

•Manual Tuning

Repeatedly press the or buttons until the display shows the exact frequency of the desired station. Use the Manual Tuning method to tune to weak or distant stations that are not strong enough to be recognized by the Automatic Tuning system.

•Automatic Tuning

Depress and hold the or buttons until the display begins to move, then release the buttons. The Tuner will search up or down the band for the next strong signal and stop on that station. Repeat this procedure until the tuner stops on your desired station.

4.) If you tuned to an FM Stereo station the ST indicator will appear in the display. If the FM Stereo reception is noisy or weak, press the ST/MONO button to select the FM Mono mode.

5.) Adjust the VOLUME and EQ controls to the desired settings.

6.) When you are finished listening press the

STANDBY button to return the system to the Standby (Off) mode.

The display lighting will become dimmer and the display changes from radio frequency to correct time.

20

ES920_102104.p65 20

21/10/2004, 12:06