Emerson ES920 owner manual Press the PLAY/PAUSE button to begin playback

5.) Press the OPEN/CLOSE button to close the CD door.

The display will show flashing dashes as the player reads the Table Of Contents on the disc.

After reading the disc the display will show the total tracks and playing time.

Note: The reading time may be even longer if you are using CD-RW (rewritable) discs. This is normal and not an indication of any problem with your unit.

6.) Press the PLAY/PAUSE button to begin playback.

7.) Adjust the VOLUME and EQ controls as desired.

8.) Playback will continue until all tracks on the disc have been played, then the player stops and the display shows the total tracks number and playing time on the disc.

To stop playback at any time, press the STOP button.

9.) If you are finished listening, press the OPEN/CLOSE button to open the CD door, remove your disc from the player, re-close the door and press the STANDBY button to return the system to the Standby (Off) mode.

25

ES920_102104.p65 25

21/10/2004, 12:06