![](/images/new-backgrounds/1103315/103315137x1.webp)
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
Fig
Next you see the block parameters and can changes the values.
Fig
First select the parameter to change within the grid. Please look at the column “Handling” for the information on whether the parameter is read/write or read only. Read only parameters cannot be changed and therefore no edit field is displayed.
Then edit the value within the edit field “parameter value” at the bottom of the view or select from the combo box. The parameters marked yellow are different to the default values.
To finish the configuration, press set and save the project.
5.8.2.5 Change Block Tags
You can change the block tags to get a better overview of where the block is situated, what its special function is and so on. For the valid character set please see the chapter on
V1.31 | page 69 of 85 |