7.) Press the Band button to switch to the AM band and repeat the above procedure to store up to 10 AM stations in the tuner memory.
NOTES:
•The FM memories are numbered “F 1” through “F 10”. The AM memories are numbered “A 1” through “A 10”.
•After you press the Memory button the first time you must select a Preset Memory number and press the Memory button again within 10 seconds, while the memory number is flashing, or the station will not be memorized.
Recalling Preset Stations
Press the Band button to select the desired band.
Press the Preset 
or 
buttons to scroll through the preset stations one by one.
Changing Preset Stations
1.) Tune to the new station that you want to store.
2.) Press the Memory button and then press the Preset 
or 
buttons to select the Memory Number that you wish to change.
3.) When the desired Preset Memory Number is flashing, press the Memory button again. The new station is now stored and the previous station is deleted from the memory.
23
iC200_NCab050307.p65 | 23 |
3/5/2007, 11:29
