2.) Select the correct adapter for your particular iPod® model from among the 5 different adapters included. Each adapter is engraved with the name and/or size of an iPod® model. Place the selected adapter in the docking area so that the iPod®
Gently press downward on the adapter until it “clicks” and locks in place.
3.) Mount the iPod® Support Bracket on the docking station as shown.
This bracket provides support and prevents your iPod® from moving too far backward when you operate the iPod® controls.
CAUTION: You must use this support bracket with all iPod® models to prevent possible damage to the iPod® connector.
NOTE: If you are using either the 30GB or 60GB fifth generation iPod® models with video capability or the 2G (Second Generation) iPod® nano, use the adapters that were supplied with the iPod® at time of purchase. They will fit correctly in the docking cradle of this system.
IMPORTANT
• If you are using a “1G (First Generation) iPod® nano” you will notice that the iPod®
• Before inserting the iPod® nano adapter into the docking area you must slide the iPod®
27
iC200_NCab050307.p65 | 27 |
