Wake To Your iPod®
NOTE: You can only wake to the “Dockable” iPod® . You cannot wake to the iPod® Shuffle.
1.) Connect your iPod® to the docking station as usual, start playback, select the song that you would like to play at the wake up time and the desired volume level, then press the 
Power button to shut the system ‘Off’.
2.) Slide the Alarm 1 and/or Alarm 2 selector switches, located on the left side panel to the iPod position.
The AL 1 and/or AL 2 indicators will appear in the main display to confirm that the alarms are ‘On’.
3.) At the selected wake up time the system will turn on in the iPod® mode to the song you selected.
NOTE: If you selected the song from the iPod® Songs menu, playback will stop when that song ends. If you selected the song from within the iPod® Album menu, playback will continue for one hour or until the end of that Album, whichever comes first.
4.) To stop the iPod® alarm sooner press the 
Power button or the appropriate Alarm 1 or Alarm 2 buttons on the top panel.
NOTES:
•If you selected the “Wake To iPod® ” option but there is no iPod® connected to the docking station at the wake up time, the alarm automatically defaults to the “Wake To Buzzer” option.
•You cannot wake to an iPod® Shuffle because the Shuffle has no interface to receive the alarm signal from this system. If you selected the “Wake To iPod® ” option but you are using an iPod® Shuffle, the alarm will automatically default to the “Wake To Buzzer” mode.
34
iC200_NCab050307.p65 | 34 |
3/5/2007, 11:29
