4.) Depress the Month/date button. The display will change from ‘time’to ‘month/ date’(mm/dd).
While holding the Month/date button, press the Tuning/Skip 
button to set the display to the correct Month and Date. The Day indicator will change automatically as you adjust the month/date settings. When the correct Month and Date appear on the display, release the buttons.
5.) Depress the Time button and the Tuning/Skip 
button to set the display to the correct Time. Be sure to confirm that you have set the time correctly to ‘AM’or ‘PM’by observing the AM indicator.
6.) After you set the time, reconfirm that the Day, and Month/Date displays are still correct. Make final adjustments if necessary.
The SmartSet® clock memory is now reset and the new lithium battery will maintain it for the next 5 to 8 years, depending on the number and duration of the power outages you experience.
IMPORTANT NOTE:
After resetting the clock, don’t forget to reset your wake up times, and alarm mode settings, and sleep timer settings as well.
44
iC200_NCab050307.p65 | 44 |
3/5/2007, 11:29
