PREPARATION
5Attaching a Wall Mount Bracket (sold separately)
The following is a description of the method for attaching a wall mount to this unit.
When performing this operation, refer to the instruction manual included with the wall mount kit.
#CAUTION
•Any damage caused by incorrectly attempting to mount this unit is not covered under the terms of the manufacturers warranty.
•This unit may be used only with VMPL manufactured by SANUS SYSTEMS.
•Use with other wall mounts may result in instability causing possible injury.
You need the following wall mount kit for this unit. Flat panel TV wall mount
Model number: VMPL
For more information,
please visit SANUS SYSTEMS website at www.sanus.com
*1 and 2 indicate the position of the screw holes on this unit.
2
rear of this unit
1 | 1 |
stand shafts
1Spread a thick and soft cloth over a table. Place the main unit face down onto it. Make sure not to damage the screen. At least two people are required at this step.
Note:
•Make sure to use a table which can support the weight of this unit and is larger than this unit.
•Make sure the table is in a stable location.
2Remove the stand shafts from this unit.
Unscrew the M5 screws indicated by 1 and remove the stand shafts. Please be careful with the unit after you remove the stand shafts.
Note:
•The M5 screws and stand shafts you have removed are necessary for reattachment at a later date. Make sure to keep them in a safe place.
3Attach the monitor brackets to this unit using the M6 screws included with the wall mount kit.
Note:
•Only use the screw holes indicated by 2 for mounting this unit.
•For instructions on how to attach the monitor plate, refer to the instruction manual included with the wall mount kit.
4Attach this unit to the wall. At least two people are required at this step.
Note:
•Refer to the instruction manual included with the wall mount kit when securing this unit to the wall.
12
EN
