OPTIONAL SETTING
5Channel List
The channel list function lets you remove undesired channels from the channel registration list.
1Press [SETUP] to display the main menu.
5Manual Register
The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting.
1Press [SETUP] to display the main menu.
2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].
2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].
3 Use [Cursor K/L] to select “Channel List”, then press |
| 3 Use [Cursor K/L] to select “Manual Register”, then |
[ENTER]. |
| press [ENTER]. |
Channell | Channell |
Autoscan | Autoscan |
Channel List | Channel List |
Manual Register | Manual Register |
Antenna | Antenna |
4Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].
Channell Listi |
|
|
|
|
Highlight channels for |
| DTV | 6 | |
Ch Up/Down key selection. |
| 27 | ||
|
|
|
| |
|
|
| DTV | 8 |
|
|
|
| 9 |
|
|
| DTV | 48 |
|
|
|
| 58 |
|
|
| DTV | 67 |
Ch Select |
| Watch/Skip | BACK |
|
ENTER | Back |
|
•The channel display for the removed channel darkens. You will not be able to select the channel again using [CH K/L].
•To reactivate a removed channel, highlight it using [Cursor K/L] and press [ENTER]. The channel display lightens.
•When you remove a major channel, its minor channels are removed as well.
4Use [the Number buttons] to enter the number of the channel you want to add, then press [ENTER].
11
Manuall Registeri
|
|
|
| For analog channels, | Register |
|
|
|
| select a channel to register using |
|
|
|
|
| number keys. |
|
|
|
|
| For digital channels, |
|
|
|
|
| you must perform Autoscan function. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BACK | Back |
|
|
|
| Ch Change | |
|
|
|
|
|
|
5Press [SETUP] to exit.
Note:
•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.
5Press [SETUP] to exit.
Note:
•If set up completes successfully,
“Registered to the Channel List” is displayed.
•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.
20
EN