INTRODUCTION

5Supplied Accessories

owner’s manual

quick start guide

remote control

 

 

 

batteries

Phillips pan screw for

(1EMN22446)

(1EMN22447)

(NF020UD)

 

 

 

(AA x 2)

attaching the stand x 4

 

 

 

 

 

 

 

 

 

 

 

(FPH34100)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.

Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.

5Attaching the Stand

You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction.

1 Spread a thick and soft cloth over

2 Insert the stand all the way to the

3 Drive Phillips pan screws in the

a table.

main unit slowly.

4 threaded holes at the bottom

Place the main unit face down

Make sure not to put the AC cord

of the stand with a screwdriver

onto it.

between the stand and the unit.

tightly.

Make sure not to damage the

 

 

screen. At least two people are

 

 

required at this step.

 

 

screw holes

front side

Note:

When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.

Make sure to use a table which can support the weight of this unit and is larger than this unit.

Make sure the table is in a stable location.

If you removed the stand shafts from this unit for wall mounting, make sure that you attach them before attaching the stand.

5Symbols Used in this Manual

The following is the description for the symbols used in this manual.

Description refers to:

DTV

: Digital TV operation

TV

: Analog TV operation

• If neither symbol appears under the function heading, operation is applicable to both.

5Trademark Information

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Product that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

4

EN

Page 4
Image 4
Emerson LC420EM8 5Supplied Accessories, 5Attaching the Stand, 5Symbols Used in this Manual, 5Trademark Information