Listening To The Radio
1.) Press the 
STANDBY button to turn the system ‘On’.
2.) Press the FUNCTION or FUNC. button to select the Tuner mode.
An AM or FM frequency will appear on the display.
Press the BAND button on front panel or 
(Stop)/BAND button on remote control to switch between the AM and FM bands if necessary.
3.) Tune to the desired station as follows:
•Manual Tuning
Repeatedly press the 
or 
until the display shows the exact frequency of the desired station. Use the Manual Tuning method to tune to weak or distant stations that are not strong enough to be recognized by the Automatic Tuning system.
•Automatic Tuning
Depress and hold the 
or 
buttons until the display begins to move, then release the buttons. The Tuner will search up or down the band for the next strong signal and stop on that station. Repeat this procedure until the tuner stops on your desired station.
4.) If you tuned to an FM Stereo station the STEREO indicator will appear in the display.
If the FM Stereo reception is noisy or weak, press the STEREO/MONO button
on front panel or 
button on remote control to select the FM Mono mode.
5.) Adjust the VOLUME and EQ controls to the desired settings.
6.) When you are finished listening press the 
STANDBY button to return the system to the Standby (Off) mode.
The display changes from radio frequency to correct time.
22
MS3111M_112306.p65 | 22 |
23/11/2006, 10:44
