Emerson MS9904TTC owner manual About Cassette Tapes, Cassette Care

CARE AND MAINTENANCE

ABOUT CASSETTE TAPES

Whenever you record on a cassette any previously recorded material is erased as the new material is recorded. To prevent you from accidentally erasing material which you wish to save, blank cassettes are equipped with erase prevention tabs for each side of the tape. If the erase prevention tab for side A is removed, you cannot accidentally record on side A. The Record key cannot be depressed if the erase prevention tab on the cassette has been removed.

To prevent accidental erasing on side A of a cassette use a small screw driver or similar tool to break off the erase prevention tab for side A. This prevents the record key from locking.

TAB FOR SIDE A.

COVER OPENING WITH TAPE IN ORDER TO RECORD AGAIN.

BREAK OFF TO PREVENT RECORDING

If later you do wish to record on side A of the cassette, cover the tab opening with a piece of cellophane tape. This will allow the Record key to function again.

CASSETTE CARE

Two common causes of trouble experienced when using cassettes are:

1.) Tape jamming —- Leading to uneven speed in playback, and

2.) Tape tangling —- Where the tape wraps itself around vital parts of the mechanism.

To reduce the likelihood of these problems occurring, the following precautions should be observed:

•Check that there are no loose layers of tape visible through the cassette center window (see Fig. 1). Take up any loose layers, using a pencil or hexagonal barrelled ballpoint pen, before inserting the cassette into the machine (see Fig. 2).

25

MS9903TT_ib080503.p6525

5/8/2003, 11:44