5.) Use the DISC button on remote control or one of the three DISC buttons on front panel to select the disc containing the next track you wish to program. Example: Disc 3.
6.) Press the 
or 
buttons to select the next track you wish to program. Example: Track 18.
7.) Press the PROGRAM button again to store the desired disc and track into memory location Number "02".
•Repeat the above procedure until you have stored up to 32 tracks in the program memory.
•After all your desired tracks are programmed you may press the PROGRAM button to reconfirm that the information has been stored correctly.
8.) Press the PLAY/PAUSE 
button to begin programmed playback. Playback will start at the first disc and track which you have programmed and will continue until all programmed discs and tracks (up to a total of 32) have been played.
NOTE: If you press the 
or 
buttons during programmed playback, the player will skip forward or back to the next track and disc which you have programmed, not the next track on the disc which is being played.
TO CLEAR THE PROGRAM MEMORY
If the disc is playing, press the STOP 
button to stop the discs. Then press the STOP 
button again, switch to other function, or turn power "Off" to clear the program memory,
17
MS9903TT_ib080503.p6516
5/8/2003, 11:44
