Emerson N400C, N410C manual Removing the System Board Screws and Screwlocks

Removal and Replacement Procedures

✎

✎

7.Turn the base enclosure top side up with the rear panel facing forward.

8.Remove the TM2.0 × 6.0 screw 1 that secures the left display support to the base enclosure (Figure 5-31).

The left display support is included in the Miscellaneous Plastics Kit (spare part number 231454-001).

9.Remove the left display support 2.

10.Remove the two HM5.0 × 9.0 screwlocks 3 that secure the external monitor connector to the base enclosure.

11.Remove the six TM2.0 × 4.0 screws 4 that secure the system board to the base enclosure.

Evo Notebook N410c models have an additional TM2.0 × 3.5 screw 5 that must be removed.

Figure 5-31. Removing the System Board Screws and Screwlocks

5–40 Maintenance and Service Guide