Emerson N410C, N400C manual Maintenance and Service Guide

Removal and Replacement Procedures

13.Position the base enclosure so the front faces forward.

14.Use the fan and heat sink assembly to lift up and hold the right side of the system board 1 until the external battery terminal 2 and NTSC module cables 3 clear the base enclosure (Figure 5-34).

ÄCAUTION: When lifting the system board, do not exert any pressure on the external monitor connector. Lifting the system board using the external monitor connector can stress and damage the system board.

15.Disconnect the external battery terminal 2 and NTSC module cables 3 from the system board.

Figure 5-34. Disconnecting the External Battery Terminal and NTSC Module Cables from the System Board

Maintenance and Service Guide 5–43