Emerson N400C, N410C manual Memory Expansion Board, Routing the RTC Battery and TouchPad Cables

Removal and Replacement Procedures

✎Before installing the palm rest on TouchPad models, make sure the TouchPad 1 and RTC battery cables 2 are routed through the respective notches in the palm rest (Figure 5-11).

Figure 5-11. Routing the RTC Battery and TouchPad Cables

5.6Memory Expansion Board

✎The Compaq Evo Notebook N410c notebook has two memory expansion slots: one is located on the bottom of the notebook and the other is located under the palm rest. The procedure for removing a memory expansion board from a memory expansion socket is identical for both locations.

Follow these steps to remove a memory expansion board from the slot in the bottom of the notebook:

1.Prepare the notebook for disassembly (Section 5.3).

2.Turn the notebook bottom side up with the front facing forward.

5–14 Maintenance and Service Guide