Menu line "Editing controls...":

From the menu "Main display configuration" you can change via the menu line "Editing controls..." to the corresponding submenu:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLD

 

 

 

 

 

 

 

 

95.0 ppm

 

 

 

 

 

 

 

 

 

 

 

 

 

Editing controls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Delay for alarm:

 

 

 

 

 

20 ms

 

 

 

 

 

 

 

 

 

Wait for new screen:

 

 

 

 

 

 

0 ms

 

 

 

 

 

 

 

 

 

Wait between key strokes:

 

 

50 ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Presses before fast scroll:

 

 

10

 

 

 

 

 

 

 

 

 

Initial delay before repeat:

 

 

200 ms

 

 

 

 

 

 

 

 

Delay before double click:

 

 

 

0 ms

 

 

 

 

 

 

 

 

Slow repeat time:

 

 

 

 

 

150 ms

 

 

 

 

 

 

 

 

Fast repeat time:

 

 

 

 

 

150 ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accelerated scrolling:

 

 

Enabled

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HOME

 

ESCAPE

 

 

 

 

 

INFO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

 

F2

F3

F4

F5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the menu "Editing controls" you can set up a lot of parameters to control the LCD by the keyboard. In any line of variable of this menu you can read which set up is possible.

Set up parameters:

¨Select any line of variables with the ↓ -key or the − -key.

¨Select the variable with the ENTER key or the → -key.

¨Select any digit with the ← -key or the → -key and adjust a new value with the − -key or the ↓ -key

resp. select the whole parameter with the − -key or the ↓ -key.

¨Confirm the new value with the ENTER key or cancel and go back to the last value with the F2 key.

6 - 8

NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98