Emerson PD3500RD Operating Instructions, General Controls, PHONES Jack, Volume Adjustments

OPERATING INSTRUCTIONS

GENERAL CONTROLS

Volume Adjustments

Press the VOLUME or buttons on top panel to increase or decrease the volume. The volume level indicator appears in the display.

The range is from “00” (Minimum) to “30” (Maximum).

The system remembers the volume level when the power is switched ‘Off’and returns to the same level when the power is switched ‘On’again.

EQ (Preset Equalizer)

This system has a 4-Band Preset Electronic Equalizer that allows you to adjust the tone output for the most popular types of music.

The settings are “CLASSIC”, “ROCK”, “POP”, “JAZZ” or flat (no EQ).

To change the EQ setting press the EQ button on the top panel until the desired setting appears in the display.

PHONES Jack

Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the PHONES jack (located at back cabinet) for private listening without disturbing others. Before putting on the headphones reduce the VOLUME control to a low level, then put the headphones on and gradually increase the VOLUME control to a comfortable listening level. The built in speakers are automatically disconnected when headphones are connected to the PHONES jack.

9

PD3500RD_102904.p65 9

29/10/2004, 15:36