LISTENING TO THE RADIO
1.) Press the POWER button on the front panel. The main display turns on.
2.) If necessary, press the FUNCTION button on the top panel to select the Tuner function. The display will show an AM or FM station frequency. To select a different band, press the STOP/BAND button.
3.) Tune to the desired frequency as follows:
•Manual Tuning
Repeatedly press the TUNING / buttons on the top panel until the frequency of the desired station appears on the display.
•Automatic Tuning
Press and hold the TUNING / buttons on the top panel until the display begins to move, then release the buttons. The tuner will search up or down the band for the next strong station and stop on that station. Repeat this procedure until the tuner stops on your desired station.
4.) If you tuned to an FM Stereo station the | indicator will appear in the | |
display. If the reception is noisy or weak, press |
| |
the STEREO button on front panel to select |
| |
FM Mono mode. The | indicator will |
|
disappear. The reception will normally improve although the sound will no longer be in stereo.
5.) Adjust the VOLUME / and EQ controls as desired.
6.) When you are finished listening press the POWER button to return to the Standby (Power Off) mode.
The display shows bye briefly then goes off and the time display reappears.
11
PD3500RD_102904.p65 | 11 |
29/10/2004, 15:36