SETTING THE CLOCK
When the unit is connected to the AC outlet for the first time the “–
Note: Do not turn the main unit power ‘On’. The clock can only be set while the main unit power is ‘Off’.
1.) Press and hold the PROG. 
button on the front panel. “12H” flashes on display.
Press SKIP 
/
buttons to select between “24H” 24 hour or “12H” 12 hour modes.
2.) Press the PROG. 
button on the front panel again. Just the Hour digits will continue flashing.
3.) Press the SKIP 
/
buttons on the top panel to set the display to the correct hour, AM or PM.
4.) Press the PROG. 
button again. The Minute digits will begin flashing.
5.) Press the SKIP 
/
buttons on the top panel to set the display to the correct minutes.
6.) Press the PROG. 
button once more. The time display stops flashing and the clock begins to run.
10
PD3500RD_102904.p65 | 10 |
29/10/2004, 15:36
