3Com 2101 manual Setting Your NBX NetSet and Messaging Password

12CHAPTER 1: GETTING STARTED

Table 4 Setting Your NBX NetSet and Messaging Password

Feature	NBX Business Phones	NBX Basic Phones	Analog Telephones
Password — Set Initially
If your system uses NBX	Msg button and follow	Msg button and follow	500 ** and follow the
Messaging, follow the NBX voice	the voice prompts	the voice prompts	voice prompts
prompts to set your NBX password
(which is the same for NBX NetSet
and voice messaging) OR use the
NBX NetSet utility, described next.
If your system uses a voice	OR, for systems that do	OR, for systems that do	OR, for systems that do
messaging application other	not use NBX Messaging:	not use NBX Messaging: not use NBX Messaging:
than NBX Voice Messaging, use	Feature	Feature	#
this code sequence to set your
	+ 434	+ 434	(Feature Entry Tone)
password for the NBX NetSet utility.
3Com recommends that you use the	+ new password	+ new password	+ 434
	+ #	+ #	(Feature Entry Tone)
same password for NBX NetSet and	+ repeat your new	+ repeat your new	+ new password
your voice messaging application.
	password	password	+ #
FOR ALL VOICE MESSAGING	+ #	+ #	(Feature Entry Tone)
SYSTEMS:			+ repeat your new
■ Use only 4- to 10-digit numbers			password
			+ #
■ Do not use letters, *, or # as part
			(Confirmation Tone)
of your password.
Password — Change
If your system uses NBX	Msg button	Msg button	500 **
Messaging, follow the NBX voice	+ current password	+ current password	+ current password
prompts to change your NBX	+ #	+ #	+ #
password (which changes your NBX	+ 2	+ 2	+ 2
NetSet password, because they are	+ follow the prompts	+ follow the prompts	+ follow the prompts
the same) OR use the NBX NetSet
utility, described next.

If your system uses a voice messaging application other than NBX Voice Messaging, use this code sequence to change your password for the NBX NetSet utility. 3Com recommends that you use the same password for NBX NetSet and your voice messaging application.

FOR ALL VOICE MESSAGING SYSTEMS:

■If you forget your password, the administrator can reset it to your extension. Then use this code (for applications other than NBX Voice Messaging) or the NBX voice prompts to change it.

OR, for systems that do	OR, for systems that do	OR, for systems that do
not use NBX Messaging:	not use NBX Messaging:	not use NBX Messaging:
Feature	Feature	#
+ 434	+ 434	(Feature Entry Tone)
+ current password	+ current password	+ 434
+ #	+ #	(Feature Entry Tone)
+ new password	+ new password	+ current password
+ #	+ #	+ #
+ repeat your new	+ repeat your new	(Feature Entry Tone)
password	password	+ new password
		+ #
		(Feature Entry Tone)
		+ repeat your new
		password
		+ #
		(Confirmation Tone)