OPERATING INSTRUCTIONS
•Make sure you have installed the back up battery in the battery compartment.
•Make sure you have removed the dummy CD transit card from the CD compartment.
•Connect the AC power cord plug to a 120V 60Hz AC outlet.
SETTING THE CLOCK
When the radio is connected to the AC outlet for the first time the display will show
1.) Depress and hold the TIME button until the display begins flashing. Continue
to hold the TIME button and repeatedly press the 
/HOUR button to adjust the display to the correct hour, AM or PM.
Note: If the “AM” indicator is ‘On’, the time displayed is AM.
AM indicator
2.) Continue to depress the TIME button and repeatedly press the 
/MIN button to adjust the display to the correct minute.
3.) When the display shows the correct time release all the buttons.
9
RET66_080504.p65 | 9 |
5/8/2004, 16:05
