Emerson RET66TQ, RET66BK owner manual Setting the WAKE-UP Time

SETTING THE WAKE-UP TIME

1.) Depress and hold the ALARM 1 button. The display will change from clock time to wake-up time and flash “12:00”.

Continue to hold the ALARM 1 button and repeatedly press the /HOUR button to adjust the display to the correct wake-up hour, AM or PM.

2.) Continue to depress the ALARM 1 button and repeatedly press the /MIN button to adjust the display to the correct wake-up minute.

3.) When the display shows the desired Alarm 1 wake-up time release all the buttons.

Repeat this procedure with the ALARM 2 button to set the desired wake up time for Alarm 2.

To check the wake-up times just press the ALARM 1 or ALARM 2 buttons at any time. The display will show the wake-up times as long as the ALARM set buttons are depressed.

10

RET66_080504.p65 10

5/8/2004, 16:05