LISTENING TO THE RADIO
1.) Set the FUNCTION selector switch, located on the front cabinet, to the FM/ AUTO or AM position.
2.) Press the POWER ON/OFF button on the top panel to turn the system ‘On’. The POWER indicator and the radio dial lighting come ‘On’.
3.) Rotate the Tuning knob to tune in the desired station. If you tune to an FM Stereo station the FM ST. indicator will light.
4.) Rotate the VOLUME control to the desired level.
5.) When you are finished listening press the POWER ON/OFF button on the top panel to shut the power ‘Off’. The POWER indicator and the dial lighting goes ‘Off’.
Hints For Better Reception
FM – The FM Antenna is built in to the AC power cord. Make sure that the cord is extended to its full length.
AM – The AM bar antenna is inside the cabinet. IF AM reception is unsatisfactory try turning the cabinet slightly until the internal antenna picks up the strongest signal.
11
RET66_080504.p65 | 11 |
5/8/2004, 16:05
