Emerson SB250A manual Playing Compact Discs

PLAYING COMPACT DISCS

NOTE: Although this portable CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R and CD-RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player.

1.) Slide the POWER OFF/CD/RADIO selector switch on the top cabinet to the CD position. The Power indicator will light.

2.) The display will show two flashing dashes “– –” in the track number display.

After a few seconds the track number display will show “no”, indicating that there is no disc in the player.

3.) Press on the indented area of the CD door to open it. The “OP” indicator appears in the display. If you have not already done so, before loading your own disc, be sure to remove the dummy CD transit card from the player and discard it.

4.) Place your disc on the center spindle with the printed label side facing up. Make sure that the disc is properly centered on the spindle.

5.) Close the CD door. The disc will spin for a few seconds while the player reads the TOC (Table of Contents) on the disc. Then the disc will stop spinning and the display will show the total number of tracks on the disc.

12

SB250A_011205.p65 12

12/1/2005, 17:25