Special Playback Modes
Repeat Playback
You can program the player to continuously repeat a single track or the entire disc. The Repeat mode can be selected while the disc is playing or while the disc is stopped.
Single Track Repeat
Select the track to be repeated and then press the REPEAT button on the front panel once. The REPEAT indicator begins flashing.
If necessary, press the PLAY/PAUSE 
button to begin playback. The selected track will be repeated continuously.
All Tracks Repeat
Press the REPEAT button on the front panel twice. The REPEAT indicator remains ‘On’.
If necessary, press the PLAY/PAUSE 
button to begin playback. The entire disc will be repeated continuously.
To cancel Repeat playback press the REPEAT button on the front panel until the REPEAT indicator goes ‘Off’.
Repeat Playback mode may also be cancelled by pressing the STOP 
button, switching to Radio function, or shutting the power ‘Off’.
Intro Scan Playback
This feature plays just the first 10 seconds of each track on the disc. This feature is useful if you are looking for a particular song but you cannot remember the track number or the song title.
1.) Load your disc as usual and wait until the display shows the total number of tracks.
2.) Press the INTRO button. The Intro Indicator appears on the display. The player will begin playing track “01”. After 10 seconds the player skips to track “02”, and so on, until it has played the first 10 seconds of each track on the disc.
3.) When you hear the desired song press the INTRO button again to cancel the Intro Scan playback mode and resume normal playback.
15
SB250A_011205.p65 | 15 |
12/1/2005, 17:25
