Site Preparation

2.0SITE PREPARATION

Site preparation for the Liebert FS is minimal. If a UPS system is already installed, the only require- ments are to properly:

• Place the unit in relation to walls, ceiling and other equipment and

• Fasten the unit to the floor.

! CAUTION

The following sections should be read thoroughly before proceeding with site preparation for installing the Liebert FS.

NOTE

All drawings referred to in this section are in Appendix D.0 - Installation Drawings.

2.1System Location

Choose a location for the Liebert FS that offers:

•Easy connection to inputs, outputs and auxiliary equipment

•Enough space to service the Liebert FS

•Air circulation sufficient to expel heat produced by Liebert FS

•Protection against moisture and excessive humidity (not to exceed 95% non-condensing)

•Protection against excessive dust and other particulate matter

•Compliance with fire prevention regulations and practices

•Operating environment temperature of -4°F to 122°F (-20°C to 50°C)

2.2Environmental Considerations

Place the system in a clean, dust-free environment. Air must be free to circulate around the cabi- net(s). The system pulls air through the front of the Liebert FS and exhausts it out the top for cooling. If the unit must be located in a dusty environment, Liebert recommends installing an optional air fil- ter, which mounts on the lower inside of the Liebert FS door.

Adequate ventilation, including air conditioning if necessary, must be provided to limit heat accumu- lation. The ambient temperature for the unit must be from -4°F to 122°F (-20°C to 50°C). Avoid plac- ing the unit in direct sunlight or near other heat sources.

There is a 32°F (0°C) minimum ambient temperature requirement for starting up the unit. Once the unit has been running for some time, it will keep itself warm enough in ambient temperatures as low as -4°F (-20°C).

Humidity is not to exceed 95% (non-condensing).

10

Page 21 Page 23
Page 22
Image 22
Emerson SERIES 600T, Series 600 user manual System Location, Environmental Considerations
Page 21 Page 23

Series 600, SERIES 600T specifications

The Emerson SERIES 600T, as part of the SERIES 600 line, is a sophisticated device designed to meet the demands of industrial automation and control systems. Renowned for its reliability and versatility, the SERIES 600T excels in various applications across multiple sectors, including oil and gas, chemical processing, and power generation.

One of the most significant features of the SERIES 600T is its advanced measuring capability. It offers exceptional accuracy, typically within ±0.1% of the full scale. This precision makes it suitable for critical applications where measurement integrity is paramount. The SERIES 600T is also equipped with intelligent diagnostics that can predict and monitor the health of the unit, enabling proactive maintenance and minimizing downtime. This technological advancement improves both operational efficiency and safety.

Another standout characteristic is the device's robust construction designed to withstand harsh environments. The SERIES 600T is made with durable materials that provide resistance to corrosion, vibration, and temperature extremes, making it an excellent choice for rugged industrial applications. Coupled with its IP67 rating, the device is fully sealed against dust and moisture, ensuring long-term reliability in challenging conditions.

The SERIES 600 line employs cutting-edge communication protocols, including HART and Foundation Fieldbus, facilitating seamless integration into various control systems. This capability ensures that users can easily access real-time data and manage devices remotely, significantly enhancing operational efficiency.

Additionally, the SERIES 600T supports a wide range of process connections and configurations, catering to diverse installation needs. This adaptability allows for quick deployments and minimizes the time required for system changes or upgrades.

With easy-to-read displays and user-friendly interfaces, operators can quickly interpret data and metrics from the SERIES 600T. This intuitive design helps reduce the learning curve for new users, further underlining the device's legacy of reliability and efficiency.

In essence, the Emerson SERIES 600T exemplifies cutting-edge technology in the realm of industrial measurement and automation. Its combination of accuracy, durability, diagnostic capabilities, and ease of integration makes it an ideal choice for industries that prioritize reliability and precision in their operations. As industrial processes continue to evolve, devices like the SERIES 600T will undoubtedly play a crucial role in advancing efficiency and productivity in various sectors.
Top Page Image Contents