Operation

6.5.5Regular Startup Procedure

! CAUTION

The Initial System Startup shall be performed ONLY under the supervision of a Liebert technician to ensure proper system operation. Failure to abide by instructions provided herein may void your warranty.

NOTE

A regular startup is any startup after the Initial System Startup.

6.5.6Inspection Before Regular Startup

The following verifications must be done before performing a regular startup of the Liebert FS (see 6.5.7 - Starting up the System):

1.Make sure the Liebert FS is properly secured to the floor with the Liebert-provided mounting kit and in compliance with the floor mounting instructions in 4.1 - Cabinet Floor Mounting.

2.Check for coolant leaks in and around the Liebert FS unit.

3.Ensure that Liebert FS cabinet panels are in place on the cabinet and that no tools have been left in the cabinet

4.Ensure that the Liebert FS Main circuit-breaker (optional) or the customer-provided external DC disconnect switch is open

5.Verify that the AC Auxiliary Backup Power is connected and powered by closing fused disconnect or wall disconnect and check if the Control Panel is ON and with no warning or fault messages displayed.

The Liebert FS may now be started up.

6.5.7Starting up the System

! CAUTION

The following procedure assumes that the Initial System Startup has been performed under the supervision of a Liebert technician.

Powering Up the Liebert FS

Once AC voltage is applied to the Liebert FS, the Liebert FS Control Panel will boot up. Its screen will begin to illuminate after 5 to 10 seconds and then display a series of boot up protocols.

Booting Up

1.It takes about 25 seconds to load and initialize the primary application software at STARTUP or after reset.

2.Title block and firmware versions will be displayed (see Figure 82). If the secondary DSP does not boot up properly, versions for the secondary DSP may be corrupted or zero.

3.EEPROM checksum will be calculated and compared with the stored value. EEPROM checksum fault will be generated if they do not match. For this case, default values are loaded for parameters in RAM. However, EEPROM contents are not changed.

! CAUTION

Do not attempt to run the system unless the system loads valid parameters.

4.Response from secondary DSP will be checked. “INTERPROCESSOR COMM FAULT” will be generated if the communication is not set up properly. The controller will reset itself for this case.

5.Previous operation command (STARTUP or SHUTDOWN) will be retrieved to determine the current operation mode.

6.Option status is checked. Current available options are VIB and DCM.

71

Page 82 Page 84
Page 83
Image 83
Emerson Series 600 Regular Startup Procedure, Inspection Before Regular Startup, Starting up the System, Booting Up
Page 82 Page 84

Series 600, SERIES 600T specifications

The Emerson SERIES 600T, as part of the SERIES 600 line, is a sophisticated device designed to meet the demands of industrial automation and control systems. Renowned for its reliability and versatility, the SERIES 600T excels in various applications across multiple sectors, including oil and gas, chemical processing, and power generation.

One of the most significant features of the SERIES 600T is its advanced measuring capability. It offers exceptional accuracy, typically within ±0.1% of the full scale. This precision makes it suitable for critical applications where measurement integrity is paramount. The SERIES 600T is also equipped with intelligent diagnostics that can predict and monitor the health of the unit, enabling proactive maintenance and minimizing downtime. This technological advancement improves both operational efficiency and safety.

Another standout characteristic is the device's robust construction designed to withstand harsh environments. The SERIES 600T is made with durable materials that provide resistance to corrosion, vibration, and temperature extremes, making it an excellent choice for rugged industrial applications. Coupled with its IP67 rating, the device is fully sealed against dust and moisture, ensuring long-term reliability in challenging conditions.

The SERIES 600 line employs cutting-edge communication protocols, including HART and Foundation Fieldbus, facilitating seamless integration into various control systems. This capability ensures that users can easily access real-time data and manage devices remotely, significantly enhancing operational efficiency.

Additionally, the SERIES 600T supports a wide range of process connections and configurations, catering to diverse installation needs. This adaptability allows for quick deployments and minimizes the time required for system changes or upgrades.

With easy-to-read displays and user-friendly interfaces, operators can quickly interpret data and metrics from the SERIES 600T. This intuitive design helps reduce the learning curve for new users, further underlining the device's legacy of reliability and efficiency.

In essence, the Emerson SERIES 600T exemplifies cutting-edge technology in the realm of industrial measurement and automation. Its combination of accuracy, durability, diagnostic capabilities, and ease of integration makes it an ideal choice for industries that prioritize reliability and precision in their operations. As industrial processes continue to evolve, devices like the SERIES 600T will undoubtedly play a crucial role in advancing efficiency and productivity in various sectors.
Top Page Image Contents