C. Change Password

Although the default code “0000” is supplied with the unit, you can set your own password.

4Use [Cursor K / L] to select “CHANGE PASSWORD”, then press [ENTER].

 

e.g.) digital TV mode

 

 

 

- V - CHIP SETUP -

or

TV RATING

MPAA RATING

 

DOWNLOADABLE RATING

 

CHANGE PASSWORD

 

 

5Press [the Number buttons] on the remote control to enter the new 4-digit password.

Enter password again in “CONFIRM PASSWORD” space.

NEW PASSWORD

_ _ _ _

CONFIRM PASSWORD

_ _ _ _

6Press [SETUP] to exit.

Note:

Make sure new password and confirm password must be exactly the same. If they are different, the space is cleared for reentering.

Your password will be erased and return to the default (0000) when a power failure occurs. If you forget the password, unplug the power cord for 10 seconds to restore the password to 0000.

INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

25

EN

Page 25
Image 25
Emerson SLC195EM8 2 owner manual Change Password, Enter password again in Confirm Password space