word (system is the default password) and click Login:
Password Screen
NOTE: The Password screen appears only once per session.
3.1.TCP/IP Setup
1.Click the TCP/IP link from the list along the left- hand side of the Home screen:
TCP/IP Settings
A.Specify the IP address.
B.Set RARP, BOOTP, and DHCP as specified by the Network Administrator. Enabling these set- tings may randomly change the IP address on
C.Configure the gateway address in the Gateway Address field specific to the customer's network as specified by the Network Administrator.
D.Configure the subnet mask in the Gateway Address field specific to the customer's network as specified by the Network Administrator.
E.Configure backup gateway in the Backup Gate- way field specific to the customer's network as specified by the Network Administrator.
F.Click Update Server Settings to save the TCP/ IP configuration.
Home Screen
2.Contact your Network Administrator to go through the following steps. (Steps correspond to letters A, B, C, D, E, and F on the graphic below):
NOTE: The IP address of the device has now changed. To connect to the new IP address, type the IP address into the browser.
3.2.Setting the Server Properties
1.Click the Server Properties link from the list along the
Configuring the |
