Emerson manual Configuring the SS-100, Device Configurator Search Tool Outlined, in the list

3Configuring the SS-100

1.IMPORTANT: Download the latest version of EZWebCon from the Lantronix Web site www.lantronix.com.

2.Connect the SS-100 to the LAN and power up the unit.

3.Open EZWebCon on your computer (which must also be connected to the LAN) and click the bin- oculars icon (outlined in red) to find the allocated IP address of the SS-100:

Device Configurator (Search Tool Outlined)

NOTE: A search will locate all SS-100s on the network. Use the MAC address located on the back of the SS-100 to find the correct SS-100

in the list.

4.Choose the correct device on the Browse Net- work screen and then click Ok:

Choose and Highlight the Device

5.Verify that the firmware version number in the "Firmware" column is "3.6/9". If the firmware version shows any other number than "3.6/9," the SS-100 is the wrong version; contact Technical Service for instructions on upgrading.

If the Firmware version is correct, proceed to step 6.

6.Highlight the device and select Action>Manage from the drop-down menu to open the Home screen:

Action Menu Displayed

7.When any of the links along the left-hand side of the screen are clicked the first time, you are prompted to the Password screen: enter the pass-

4 • SS-100 HALComm and UltraSite Wiring Layouts 026-1607 Rev 4 07-APR-2010