2.Set the Port Inactivity Timeout to 5 minutes under Server Settings and click the Update Server Settings button.
If using UltraSite, set the following parameters on the Lantronix:
Server Settings Outlined in Red
3.3.Setting the Port Properties for UltraSite and HALComm in Lantronix
3.3.1.UltraSite
1.Click the Port Properties link (above graphic) from the list along the
Serial Port Settings Screen for UltraSite
•Set the Flow
•Check the Inactivity Logout and Modem Emulation boxes.
•Click the Update Port Settings button.
•Click the Go back link to save the settings and go back to the Serial Port Settings screen.
Go Back Screen
•Uncheck the DSR Logout and DTR Wait boxes.
•Click the Update Port Settings button.
6 • Setting the Port Properties for UltraSite and HALComm in Lantronix |