Emerson Process Management 1420 manual European Certification, IECEx Certification

Quick Installation Guide

00825-0100-4420, Rev CA June 2007

1420 Wireless Gateway

Canadian Standards Association (CSA)

N6 CSA Division 2 & Dust Ignitionproof

Certificate Number: See Certificate

Suitable for Class I, Division 2, Groups A,B,C,D;

Dust Ignitionproof for Class II, Groups E,F, and G;

Suitable for Class III Hazardous Locations.

Install per Rosemount drawing 01420-1011.

Temperature Code: T4 (-40°C < Ta < 60°C)

CSA Enclosure Type 4XEuropean Certification

European Certification

N1 CENELEC Type n (ATEX)

See note below

Certificate Number: See Certificate

ATEX Marking: Ex II 3 G

EEx nA nL IIC T4 (-40°C < Ta < 60°C)

ND ATEX Dust Ignition-proof Approval

Certificate Number: See Certificate

Ex tD A22 IP66 T135 (-40 °C< Ta < +60

EEx nA nL IIC T4 (-40°C < Ta < 60°C) II 3D

Vmax = 28V

IECEx Certification

N7 IECEx Type n

See note below

Certificate Number: See Certificate

Ex nC IIC T4 (-40°C =< Ta <= +60°C)

Rated Voltage: 28V

NF IECEx Dust Ignition-proof Approval

Certificate Number: See Certificate

Ex tD A22 IP66 T135 (-40°C < Ta < 60°C)

Vmax = 28V

CONDITIONS OF INSTALLING N1 AND N7:

The Apparatus is not capable of withstanding the 500V insulation test required by Clause 9.4 of EN 60079-15: 2005. This must be taken into account when installing the apparatus.

13