Emerson Process Management manual To configure the 1420 for a Serial connection

Quick Installation Guide

00825-0100-4420, Rev CA June 2007

1420 Wireless Gateway

STEP 3 CONTINUED...

To configure the 1420 for a Serial connection:

Table 4: Serial Communication Settings on page 15 is available to assist in recording the necessary information.

1.Configure 1420 Serial Communication Settings

a.Access the 1420 Web Interface with Administrator access

b.Navigate to Setup>Modbus>Communication

c.Click Enable Modbus

d.Configure the 1420 Modbus Communication settings to match the Host Modbus settings

NOTE:

Modbus communications will fail if they are not configured identically on the Host and the 1420.

e.Click Submit and proceed with restart

2.When configuration is completed, disconnect the PC/laptop from the 1420 and return the PC/laptop to its previous network settings.

9