
Chapter 2: Installation | 7 |
|
|
CAUTION: To reduce the risk of electric shock or damage to your equipment -
-Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
-Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
-Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit.
Analog User B
Configuration Port
(for updating firmware) | AutoView Switch |
Servers 3-16
Analog User A |
|
AVRIQ Module | IAC Module |
Server 1 | Server 2 |
Figure 2.2: Basic AutoView Switch Configuration
NOTE: Only the AutoView 1500 and the AutoView 2000 switches support two simultaneous users.